1.It can be used to process a variety of metals, non-metallic (effect depending on lasertype) material, especially for high hardness, high melting point, brittle materials, more obvious advantages.
2, It is a non contact processing, does not damage the product, no tool wear, with high marking quality.
3. Laser beam is very small, and the material consumption is very small, and the processing thermal influence area is small.
4. The processing efficiency is high, the use of computer control, easy to realize automation.
● All kinds of metal materials and some non-metallic materials marking
● Air cooling system, no maintenance
● Free to change the marking parameters and graphics
● Stable working performance, life time can reach 100,000 hours
● Marks are anti-falsification, more fine and unique
|optional marking area||110*110mm/1 50*1 50mm/200*200mm|
|minimum line width||0.012mm|
|life-span of fiber laser module||100.000 Hours.|
|focus spot diameter||<0.001 mm|
|output power of laser||10%-100%continuously to be adjusted|
|system operation environmen||windows xp/wind7/wind8|